Failed Building Inspection: What Happens and What to Do

Updated 8 min read

Short answer

A failed building inspection means the inspector lists corrections in writing. You fix them, request a reinspection, and cannot cover the work until it passes. Many cities charge a reinspection fee, often after a repeat failure or if the work wasn't ready.

Indianapolis reinspection fee
$175, assessed automatically on a failed inspection
Indy.gov, New Building Construction
League City, TX repeat-failure fees
$100, then $300, then $500 for the same item
League City Inspections page
San Ramon fee trigger
Same correction item failing at two or more inspections
City of San Ramon reinspection fee page
On this page (8)
  1. What happens when you fail a building inspection
  2. Why you can't build past a failed inspection
  3. Reinspection fees after a failed inspection
  4. How to get from a failed inspection to a pass
  5. Failed inspection versus a plan check correction
  6. What a failed inspection can lead to
  7. Ways to avoid a failed inspection
  8. Common questions

A failed building inspection is a routine part of the permit process, not a violation and not a stop to the project. The inspector writes down what doesn't match the approved plans or the code, you fix those items, and you request a reinspection. What you can't do is cover the failed work or move past that stage until it passes. The costs that come with a failure are mostly a reinspection fee and lost schedule days, and both are easier to control than most people expect.

This guide covers what the failure notice means, what a city can and can't do about it, how reinspection fees work, and a step-by-step way to get to a pass. For the full list of inspections a house goes through, see our guide to required residential building inspections.

What happens when you fail a building inspection

When an inspection doesn't pass, the inspector records the failure and leaves or sends you a written list of corrections. Cities call it a correction notice, a notice of corrections, a failed inspection report or a red tag. The name varies. The content is the same: the items that didn't comply and, usually, the code section behind each one.

Rocklin, California's reinspection policy handout shows the typical mechanics. The city may charge a fee when work isn't ready for inspection or when items on a Notice of Corrections haven't been completed, and the fee slip is left on site. The handout is from 2016, so treat its dollar amount as dated and read it for how the process works.

Three things follow from a failure in almost every jurisdiction:

  1. The work stays open. You can't cover the failed items or go on to the next stage until they pass.
  2. You schedule the reinspection. League City, Texas, says on its inspections page that it is the contractor's responsibility to reschedule failed inspections.
  3. A fee may need to be paid first. The same page says any applicable reinspection fees must be paid before you can request more inspections.

A failure also doesn't mean the whole stage failed. Most notices list a handful of items. The inspector isn't re-reviewing the design, only checking that the listed items now comply.

Why you can't build past a failed inspection

The model codes put the stop point in the inspection section. The "Approval required" provision, numbered 110.6 in several adopted codes, says work can't proceed beyond the point of each successive inspection until the building official approves it. The text of Massachusetts' 780 CMR 110.6 carries this title and rule. Section numbers move between code editions and states, so check the one your jurisdiction adopted.

The practical consequence is concealment. A California Building Code summary on GoCodebook says calling for an inspection after the work is already covered violates this section, that the inspector can require you to uncover it, and that reinspection fees may follow under local policy. Rancho Palos Verdes' concealed construction guidelines say the same: the inspector may require exposing concealed components if the exposed ones aren't compliant.

That is the real cost to avoid. A failed framing inspection that you fix in an afternoon costs a fee and a day. Insulation and drywall installed over failed framing costs a demolition.

Expirations slip when nobody owns the date. Track filing and permit dates with reminders →

Reinspection fees after a failed inspection

Reinspection fees are set locally, not by the model code, so the amounts and triggers differ a lot. The published examples below show the range. Check your own city's current fee schedule before you plan around any of them.

CityWhat the page saysSource
Indianapolis, IN$175 assessed automatically under the permit when an inspection fails (fee schedule update effective January 5, 2026)Indy.gov
League City, TX$100 first failure, $300 for a second failure on the same item, $500 for a thirdLeague City
Crest Hill, IL$100 per failed inspection, paid before reinspection can be scheduledCrest Hill FAQ
Houston, TXReinspection fee plus an administrative fee for inspections that go ahead without corrections madeHouston Permitting Center
San Ramon, CAFee applies when the same correction item fails at two or more separate inspectionsSan Ramon

Indianapolis, IN

What the page says
$175 assessed automatically under the permit when an inspection fails (fee schedule update effective January 5, 2026)
Source
Indy.gov

League City, TX

What the page says
$100 first failure, $300 for a second failure on the same item, $500 for a third
Source
League City

Crest Hill, IL

What the page says
$100 per failed inspection, paid before reinspection can be scheduled
Source
Crest Hill FAQ

Houston, TX

What the page says
Reinspection fee plus an administrative fee for inspections that go ahead without corrections made
Source
Houston Permitting Center

San Ramon, CA

What the page says
Fee applies when the same correction item fails at two or more separate inspections
Source
San Ramon

Two patterns matter more than the dollar figures.

Some cities charge on the first failure, others on the second. Indianapolis and Crest Hill charge when an inspection fails. San Ramon waits for a repeat failure of the same item. If you're working in several jurisdictions, don't assume one city's grace rule applies in the next.

Fees can escalate. League City's tiers rise for each repeat failure on the same item. Fixing the root cause the first time is the cheapest outcome.

Not being ready can trigger a fee too. Grand Island, Nebraska's local amendment says a reinspection fee may be assessed when the portion of work called for inspection isn't complete or when corrections called for aren't made. Calling for an inspection early to "get in the queue" is how many projects collect a fee they didn't need to.

A fee isn't always final. Some jurisdictions let you ask the building department to re-evaluate it, as Parkland, Florida does for contractors. Ask before you pay if you believe the inspection was wrongly failed or the site wasn't the problem.

How to get from a failed inspection to a pass

Work through the notice in this order.

  1. Read the notice line by line. Note each item, the code section cited and any deadline. Pennsylvania's UCC enforcement rules, for example, have the code official inspect after the compliance date stated in an order and close it if the violation was corrected (34 Pa. Code § 403.82). A notice may carry a deadline of its own, so look for one.
  2. Sort the items. Mark what is a field fix, what needs the engineer or designer, and what needs a plan revision. A field fix takes days. A plan revision goes back through plan check and takes longer.
  3. Ask the inspector if something is unclear. Most inspectors will explain what they want to see. Do this before you spend money on a fix that doesn't answer the item.
  4. Fix every item, not most of them. A reinspection that finds one item left is a second failure. In cities that escalate on repeats, that is the expensive one.
  5. Document the fix. Take dated photos of each corrected item, and keep any engineer's letter or special inspection report. If the inspector disagrees at reinspection, the record helps.
  6. Pay any fee first. If your city blocks scheduling until the fee clears, as League City and Crest Hill do, do this right after the notice so it doesn't cost you a scheduling slot.
  7. Confirm the plans and access are ready. Fillmore, California's inspections FAQ lists missing approved plans and no access for the inspector among reasons a fee may be charged. Have the approved set on site and someone there to meet the inspector.
  8. Request the reinspection. Use the same channel as a normal inspection request. Louisville, Colorado's inspection page says you can't request any inspections until a re-inspection fee is paid, so expect a hold if you skip step 6.

Failed inspection versus a plan check correction

The two get confused. A plan check correction comes from the plan reviewer before the permit is issued and concerns the drawings. A failed inspection comes from the field inspector after the permit is issued and concerns what has been built. They go through different processes and different people.

If a failed inspection reveals that the built work can't comply with the approved plans, you may need a revision to the plans, which then goes through review. For how to respond to written review comments, see our guide on responding to a plan check correction letter.

What a failed inspection can lead to

For most projects, the answer is nothing beyond the correction and a fee. Two situations raise the stakes.

Unresolved items for a long time. An open permit with no passing inspections can expire. How long a permit stays valid depends on the jurisdiction, so see our guide on how long a building permit is good for. A string of failed inspections on a stalled job is the usual way people end up there.

Work that continues after a failure. Building past a failed inspection is the fastest way to move from a correction notice to enforcement. If the city then issues a stop order, our guide to a stop work order covers what it means and how to lift it.

Ways to avoid a failed inspection

You can't prevent every failure, but a few habits remove most of the avoidable ones.

  • Walk the work against the approved plans before you call. Most failures are mismatches between what's built and what was approved, such as a changed location, a missing item or a substitution.
  • Don't call until the work is done. An incomplete stage is a failure and may be a fee.
  • Keep the approved plans, the permit card and any special inspection reports on site. Their absence is a reason for a fee in some cities.
  • Have someone present who can answer questions and open every area. A locked building is a listed reason for a fee in Aiken, South Carolina.
  • Check the local list of required inspections at permit issuance, since cities add stages beyond the model code.
  • Track what is booked and what is pending. On jobs with several trades, the failure that costs the most is the one nobody noticed until the next inspection was already scheduled.

Common questions

Can I still build if I fail a building inspection?

Not past that stage. The inspection section of the model codes, 110.6 in several adopted versions, bars proceeding beyond an inspection point without approval. You can usually work on other areas that aren't concealing the failed items, but ask your inspector before you do.

How much is a reinspection fee after a failed inspection?

It depends on the city. Published examples run from $100 per failed inspection in Crest Hill to $175 in Indianapolis, and League City steps up to $300 and then $500 for repeat failures on the same item. Check your building department's current fee schedule, since amounts change.

Do I have to pay the reinspection fee before the next inspection?

In many cities, yes. League City, Crest Hill and Louisville, Colorado all say inspections can't be requested or scheduled until the fee is paid. Paying right after you receive the notice avoids a delay.

How long do I have to fix a failed inspection?

The notice sets the deadline, where one applies, and it varies by jurisdiction. The model code doesn't give one number. Read the notice, and if it has no date, ask the inspector or the permit counter.

Can I appeal a failed inspection?

Ask the inspector to explain the item first. Some cities also let you ask the building department to re-evaluate a reinspection fee. For disputes over how the code was applied, ask your building department what appeal process your jurisdiction has, since it is set locally.

Is a failed inspection the same as a violation?

No. A failed inspection means the work isn't yet approved and lists what to fix. A violation notice is an enforcement action. A correction list becomes an enforcement matter mainly when work continues past a failure or the corrections are ignored.

Get permit notes like this by email

Practical notes from real plan-check cycles: what reviewers flag and how to get ahead of it. A few emails a month.

Unsubscribe anytime from any email.

Put every permit date on the calendar

Add the dates as tasks with an owner. Reminders go out 7 and 3 days before, the day before, and on the day.

Start free